aivituvin AIR46 User manual

I
AIR46
www.aivituvin.com
NSTRUCTION
MANUAL

Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure
every 90 days.
Fasten screws loosely during initial assembly. Do not
fully tighten screws until the item is completely
assembled.
Do not use or store this item in the proximity of open
flame or flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop
using this product until repairs are made and/or factory
replacement parts are installed.
Do not use this item in a way inconsistent with the
manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future
NOTICE
01

02
PHILLIPS
SCREWDRIVER DRILL (RECOMMENDED) 2PERSON ASSEMBLY APPROXIMATELY 60MIN. ASSEMBLY
M4.0x45 mm SCREW
28PCS+1 spare
M3.5x60 mm SCREW
24PCS+1 spare
M3.5x50 mm SCREW
37PCS+1 spare
M3.5x35 mm SCREW
8PCS+1 spare
TOOLS REQUIRED
HARDWARE
P1 P2
P3 P4
P5 P6
M3.5x25 mm SCREW
56PCS+1 spare
M3.0x16 mm SCREW
30PCS+1 spare
Latch
1PC
P5 P6
P7
Lock
2PCS
P8

03
P1
R1
Q1
P2
Q2
R2

04
A1 A2
B1
D2 E F1
PARTS
Back panel of coop
1PC
Front bottom panel of coop
1PC
Right bottom panel of coop
1PC
Left bottom panel of coop
1PC
Front panel of nesting box Side panel of nesting box
Right panel of coop
1PC 1PC Front panel of coop
B2
C D1
Left panel of coop
1PC
2PCS 2PCS

F2
G
PARTS
05
Side panel of nesting box
2PCS
Bottom panel of nesting box
2PCS
H
4PCS
Divider of nesting box
KL M
Round Perch of coop
3PCS
Perch of pen
2PCS
Perch of coop
1PC
Tray
1PC
Roof of nesting box
2PCS
PVC Waterproof Strip
2PCS
I1 I2 J

06
Q2 R1
PARTS
Pen panel
1PC
Pen panel
1PC
Pen panel
1PC
R2
N1
N2
Right roof of coop
1PC 1PC
Left roof of coop
O
1PC
Ramp
P1
P2
Pen panel
1PC 1PC
Pen panel
Q1
1PC
Pen panel

07
PARTS
S
T
Back pen panel
1PC 1PC
Inner roof of pen
U
1PC
Middle roof of pen
V
W
Outer roof of pen
1PC 2PCS
Roof cap
X
10PCS
Connect bar
Y
Waterproof pvc
1PC

PRODUCT ASSEMBLY
01
①Attach the part A1, part D1 by 2 X P2 screws.
②Attach the part A2, part D2 by 2 X P2 screws.
08
A1
D1
A2
D2
P2 X2
02
Then attach the part B1, part B2,part C to the step 1 by 16 X P1 screws.
B1
P2 X2
P1 X16
C
B2

PRODUCT ASSEMBLY
03
09
I1x3
04
Attach the perch Part J to the slots inside the front and right panel by 1XP3 screws
each side.
J
P3 X1
K
P3 X1
①Slide in the tray Part K.
②Insert the perches 3xPart I1 into the slots inside the left and right panel of
coop.

PRODUCT ASSEMBLY
05
Attach the side panels of nesting box Part F1 & F2 to the coop by 6XP3 screws.
06
Attached the front panel of nesting box Part E to the side by 6XP1 screws.
10
P3 X6
F1
F2
EP1 X6

PRODUCT ASSEMBLY
08
07
11
Attach the another side panels of nesting box Part F1 & F2 to the coop by 6XP3
screws.
P3 X6
F1
F2
Attached the front panel of nesting box Part E to the side by 6XP1 screws.
EP1 X6

PRODUCT ASSEMBLY
09

10
12
G
①Drop in the bottom panel of nesting box Part G.
②Slide in the divider 2 x Part H each side.
G
Hx2
Hx2
Attach the roof of nesting box 2 X Part L to the nesting box by 6XP6 screws
each side.
P6 X6
L
L
P6 X6

PRODUCT ASSEMBLY
12
Attach the lock 2 X P8 to the nesting box by 6XP6 screws each side.
11
13
P8 X1
P6 X6
P8 X1
P6 X6
Attach the coop roof Part N1 & Part N2 to the coop by 8XP4 screws.
N1
P4 X8
N2

PRODUCT ASSEMBLY
13
14
①
②
Put the Waterproof pvc Part Y in the connection position of 2 roof cap to
avoid the water leakage.
Then attached the roof cap 2 x Part W by 8XP5 screws.
14
Wx2
P5 X8
Y
①Attach the pen panel Part P1 to the coop by 3XP2 screws.
②Attach metal rod Part P7 to the back panel of coop by 2xP6 screws.
P7 X1
P6 X2
P2 X3
P1

PRODUCT ASSEMBLY
16
Attach the bottom connecting bars Part X by 4XP5 screws, the position is shown
in the picture.
15
15
P5 X4
X
①Attach the pen panel Part P2 to the coop by 3XP2 screws.
②Attach the bottom connecting bars Part X by 4XP5 screws, the position is shown in
the picture.
P2 X3
P2
P5 X4
X

PRODUCT ASSEMBLY
18
Attach the perch Part I2 into the slots inside the inner pen panel Part P1&P2 by 2XP3
screws.
17
16
P3 X2
I2
P6 X4
O
Attach the ramp Part O to the coop by 4XP6 screws.

PRODUCT ASSEMBLY
20
Attach the up and down four connecting bars Part X by 4XP5 screws each, the
position is shown in the picture.
19
Attach pen panel Part Q1 & Q2 by 6XP2 screws.
17
P2 X6
Q1
Q2
P5 X8
Xx2
P5 X8
Xx2

PRODUCT ASSEMBLY
22
①
②
Attach the up and down four connecting bars Part X by 4XP5 each, the position is
shown in the picture.
Attach the perch Part I2 into the slots inside the inner pen panel Part R1 & R2 by
2XP3 screws.
21
Attach pen panel Part R1 & R2 to the coop by 6XP2 screws.
18
R1
P2 X6
R2
P5 X8
Xx2
P5 X8
Xx2
P3 X2
I2