aivituvin AIR 64 User manual

INSTRUCTION
MANUAL
AIR 64
www.aivituvin.com

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
30MIN. ASSEMBLY
HARDWARE
P1 P2
P3 P4
02
M3.5x40mm SCREW
M3.5x25mm SCREW
M4.0x60mm SCREW
23PCS+1spare
16PCS+1spare 3PCS+1spare
P5 P6
Hinge
2PCS
Plastic Feet
6PCS
M3.0x16mm SCREW
20PCS+1spare
P7
Connector
P8
M3.0x20mm SCREW
68PCS+1spare
17PCS

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
03
CARTON 1/2
E
2PCS
Bottom floor
J K
1PC 1PC
Roof-right
Roof-left
D
1PC
Left side panel
C
1PC
L
1PC
Waterproof Strip
Hardware bag

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
04
CARTON 2/2
F G H
1PC 1PC
1PC
Front panel-right
PVC curtain Divider panel
A B
1PC
1PC
Back panel-left
Back panel-right
I
1PC
Front panel-left

PRODUCT ASSEMBLY
01
02
05
Pls line up the Part C & Part D as shown on the picture before attach the
Part A & B to Part C & D by 8xP1.
Screw the connector 2XP7 by 8XP8 screws.
.
line up the same level
Side Panel
(Part C & Part D)
Part A & Part B
P1
X8
P7
X2
P8
X8
A
B
D
C
①
②
Put in bottom floor 2XPart E.
EE

PRODUCT ASSEMBLY
03
04
06
Pls line up the Part C & Part D as shown on the picture before attach the
Part F & I to Part C & D by 8xP1.
line up the same level
Side Panel
(Part C & Part D)
Part I & Part F
IF
P1
X8
D
C
①Screw the curtain Part G to the INSIDE of Part F by 3xP3 screws.
②Screw Part H to the INSIDE of Part F by 2xP2 screws.
P3X
3
P2X
2
F
G
H

PRODUCT ASSEMBLY
05
07
①Screw the divider panel to the bottom panel by 1xP2 screw.
Screw the connector P7by 4XP8 screws on each one.
P2
X1
P
7
X2
P
8
X8
P
7
X1
P
8
X4
②
P
7
X1
P
8
X4

PRODUCT ASSEMBLY
06
07
08
①
②
③
P7
X3
P8
X12
Screw the connector 3XP7to the INSIDE of the roof by 4XP8 screws
on each one.
Attach 6pcs of plastic feet P6 by 12xP3 screws.
Screw the roof hinge to the back by 3xP4 screws on each one.
Notice to level up before screwing together.
KJ
P4
X12
JK
P
6
X6
P
3
X12

PRODUCT ASSEMBLY
08
09
①
②
09
Screw the roof hinge P5, one side to the roof by 2xP4 screws, the other
Repeat on the other side.
side to the left side panel by 2xP4 screws.
P5
X2
P4
X8
P3
X8
L
Screw the waterproof strip Part L to the OUTSIDE of the roof by 8XP3
screws.

PRODUCT ASSEMBLY
10
Screw the connector 4XP7by 16XP8 screws each side.
Finish
P
7
X4
P
8
X16
P
7
X4
P
8
X16
10

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.