Bosch AMAX panel 2100 User manual

AMAX panel
AMAX panel 2100 | AMAX panel 3000 | AMAX panel 3000 BE | AMAX panel 4000
en Quick Installation Guide
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

Table of contents
1Safety 4
2Short information 6
3System overview 7
4Connecting Modules and Devices 10
5Programming and operating the AMAX panel 11
5.1 Option: Changing Menu Language 11
5.2 Accessing the Menus 11
5.3 Menu Navigation 11
5.4 Programming the AMAX panel with a text keypad 12
5.4.1 Installer menu 12
5.4.2 Setting date and time 21
5.4.3 Deleting a Zone 21
5.4.4 Enabling the RF Receiver for Wireless Communication 22
5.4.5 Setting up a Zone for an RF Device 22
5.5 Connecting the AMAX panel to a PC 23
5.5.1 Prerequisites for connecting 23
5.5.2 Setting up a connection 23
6Technical data 24
AMAX panel Table of Contents | en 3
Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.05 | 06 | F.01U.309.297
All manuals and user guides at all-guides.com

Safety
Danger!
Electricity
Injuries due to electricity are possible if the system is not operated correctly or if the system
is opened or modified not accordingly to this manual.
– Disconnect all Telecommunication Network Connectors before switching off the power.
– To switch off the power, make sure to have a circuit breaker available.
– Make sure that the system is switched off during the installation and wiring process.
– Only open or modify the system accordingly to this manual.
– Make sure to connect the system to a socket-outlet with a protective grounding contact.
– Only qualified installers /service personnel are allowed to install this system.
Danger!
Battery
Injuries due to electric shock, fire or explosion are possible if the battery is handled or
connected incorrectly.
– Always handle the battery carefully and replace it carefully.
– Make sure that the grounding terminal is always connected and that N, L1 or xx are
connected correctly.
– Make sure to first disconnect the positive wire of the battery when removing it from the
system.
– Be careful when connecting the positive (red) wire and the "BATT +" port of the system.
Make sure not to short-circuit with the "BATT +" port of the AMAX panel or the housing to
prevent electric arc from occurring.
Danger!
Electrostatic-sensitive components
Injuries due to electric shock are possible if anti-static steps are not followed.
Always contact the grounding terminal before installing or altering the system to discharge the
possibly carried static electricity.
!
Caution!
Sensitive components
Damage of sensitive components is possible if the system is not handled carefully or if the
system is opened or modified not accordingly to this manual.
– Always handle the system carefully.
– Only open or modify the system accordingly to this manual.
!
Caution!
Battery
Damage or contamination of the system is possible if the battery is not handled correctly or if
the battery is not replaced on a regular basis.
– Only use a non-spillable battery.
– Place a label with the last replacement date on the battery.
– Under normal conditions of use, replace the battery every 3-5 years.
1
4en | Safety AMAX panel
2016.05 | 06 | F.01U.309.297 Quick Installation Guide Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com

– Recycle the battery after replacement according to local regulations.
!
Caution!
Installation
Damage or malfunction of the system is possible if the system is not mounted and installed
correctly.
– Place the system inside the monitored area on a stable surface.
– Make sure to mount keypads on the inner side of the monitored area.
– Once the system is tested and ready to use, secure the enclosure door and additional
enclosures with screws.
!
Caution!
Maintenance
Damage or malfunction of the system is possible if it is not maintained on a regular basis.
– It is recommended to test the system once a week.
– Make sure to get the system maintained four times a year.
– Only qualified installers /service personnel are allowed to maintain this system.
AMAX panel Safety | en 5
Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.05 | 06 | F.01U.309.297
All manuals and user guides at all-guides.com

Short information
This manual contains information on how to get the system into operation easily and quickly.
The manual describes the main steps required for basic system installation and setup of an
AMAX panel together with one IUI-AMAX4-TEXT keypad and one RFRC-OPT RADION receiver.
4For detailed information on installation of modules and devices, advanced settings and
programming, refer to the AMAX Installation Manual.
4For information on operating the AMAX panel, refer to the AMAX Operation Manual.
2
6en | Short information AMAX panel
2016.05 | 06 | F.01U.309.297 Quick Installation Guide Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com
all-guides.com

System overview
DX2010
B426
Ethernet
Video
DX4020G
PSTN GSM/
GPRS
AMAX 3000
AMAX 2100 / 3000
RADION
DX3010
Text KeypadLCD / LED Keypad
DX4010V2
B450
(B442/B443)
GPRS
USB
IP
DSL
Public
IP network
Option bus
A-Link Plus CMSAMAX SDK Telephone
Signaling
Figure 3.1: AMAX 2100 / 3000 overview
DX2010
Option bus
Video
RADION
DX3010
Text KeypadLCD / LED Keypad
DX4010V2
B426
Ethernet
DX4020G
PSTN GSM/
GPRS
B450
(B442/B443)
GPRS
A-Link Plus CMSAMAX SDK
USB
IP
DSL
Public
IP network
Telephone Signaling
Figure 3.2: AMAX 3000 BE / 4000 overview
3
AMAX panel System overview | en 7
Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.05 | 06 | F.01U.309.297
All manuals and user guides at all-guides.com

Wiring diagrams
4
/ B450
≤ 500mA
Figure 3.3: Wiring diagram AMAX 2100 / 3000
8en | System overview AMAX panel
2016.05 | 06 | F.01U.309.297 Quick Installation Guide Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com

Program Key Port
GND
-
+
A C
A C
Transformer
Battery
Tamper
L2 COM COM COM
L1a L3 L4 L5 L6 L7 L8
L9
COM
COM
COM
COM
L10
L11
L12
L13
L14
L15
L16
P0+4
R
B
G
Y
AUX1
-
AUX2
-
AUX1
+12V
Y
G
B
R
RINGRHTHTIP
L1b
P0+3
P0+
P0-2
P0-1
Zones
Bosch Option
Bus 2 < 900mA
+12V
+0 V
1
2
3
3
1 Tamper Switch
2 Zone Switch
3 EOL 2,2 k
4 NO + NC
3
2
Fuse 1 A
PO+4: < 750mA
PO+3: < 750mA
PO -2: < 500mA
PO -1: < 500mA
230V ~50Hz
230mA
Wachdog
output
<100mA
12V < 18Ah
18VAC@50VA
Zones
AUX 1: < 900mA
AUX 2: < 900mA
AUX Power
Fire
Intrusion
3
3
2
Slow flash: Normal state
On: Trouble state
Off: Trouble state
_
_
_
_
_
_
_
_
+12V
+12V
+12V
COM
_
12V 7Ah
AUX2
+12V
_
COM
supervised
PO-5
Z1
2
23
3
Keypads:
IUI-AMAX4-TEXT
IUI-SOL-TEXT
IUI-AMAX3-LED16
IUI-AMAX3-LED8
Keypads:
IUI-AMAX-LED8
IUI-AMAX-LCD8
I/O Moduls:
DX2010 Adr. 103 - 108
DX3010 Adr. 150 - 151
DX4010 Adr. 253
Communicators:
DX4020G Adr. 134
B426 / B450 Adr. 134(6) / 250(9)
RF Receiver:
RF3227E 1=
RFRC-OPT 1= (1)
1 =
2=
3 =
4 =
1=
2=
Bosch Option
Bus 1 < 900mA
COM
R
BGY
R
B
G
Y
R
B
G
Y
♥
IUI-AMAX3 +4 Keypad
3
1
2
1
Factory
Default
5-16 Inst. Guide
I
2000mA
100 Ω - 2,2 k
_
<
∑
3
4
Figure 3.4: Wiring diagram AMAX 3000 BE / 4000
AMAX panel System overview | en 9
Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.05 | 06 | F.01U.309.297
All manuals and user guides at all-guides.com

Connecting Modules and Devices
The AMAX panel provides Bosch option bus 1 and option bus 2 (only for AMAX 3000 BE and
AMAX 4000) to connect modules and devices. Each module can be connected to each bus.
A maximum of 14 modules (8 keypads) can be connected to each bus.
The following overview displays the maximum number of modules that can be connected.
Module AMAX 2100 AMAX 3000 /
3000 BE
AMAX 4000
Keypads 4 8 16
DX2010 - 3 6
DX3010 1 2 DX3010
DX4010 1 - DX4010
B426 2 or 1 if B450 with B442 or B443 / DX4020G is used
B450 + B442 GPRS + DX4020G 1
RF receiver - 1
Table 4.1: Maximum number of modules
How to connect a keypad and a RADION receiver
1. Connect the keypad to the option bus on the AMAX panel according to the wiring diagram
(refer to System overview, page 7).
2. Connect the RFRC-OPT RADION receiver to the option bus on the AMAX panel according
to the wiring diagram (refer to System overview, page 7).
3. Connect the red and black wires supplied with the battery to the AMAX panel and the
battery.
4. Connect the power adapter to the mains.
4
10 en | Connecting Modules and Devices AMAX panel
2016.05 | 06 | F.01U.309.297 Quick Installation Guide Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com

Programming and operating the AMAX panel
The AMAX panel is programmed and operated through the installer or the user menu on a
keypad and/or through the remote programming software A-Link Plus on a PC.
When all modules and devices are installed, the AMAX panel indicates the system status
through the LED status indicator on the mainboard. A slow flashing in red (repeating on and
off with an interval of 1 second) indicates normal system operation.
The AMAX panel begins charging the battery. The green MAINS indicator on the keypad
indicates that the power supply is switched on and the keypad beeps.
4Press any key on the keypad.
The keypad stops beeping and you are prompted to enter a code.
The AMAX system provides two types of default access codes:
–Installer Code: [1234]
–User Code: [2580] for master user 1 / [2581] for master user 2
Option: Changing Menu Language
If necessary, the menu language can be changed. If not, proceed to section Accessing the
Menus, page 11.
1. Enter the installer code [1234] + [58] or the user code [2580] / [2581] + [58] and press
[#].
The available menu languages are displayed.
2. Select the desired language on the keypad.
3. Press [#].
PThe menu language is changed.
Accessing the Menus
Accessing the programming menu
1. Confirm that the system is disarmed and that no alarm occurred.
2. Enter the installer code. The default setting for the installer code is [1234].
The system displays [958] PROGR. MODE [-EXIT].
3. Enter [958] + press [#].
PYou have now access to the programming menu for configuring the AMAX system.
PThe STAY and AWAY indicators flash to indicate the programming mode.
Accessing the user menu
4Enter a user code. The default users are master user 1 (code: [2580]) and master user 2
(code: [2581]).
PThe system displays [▼/▲] USER MENU *STAY #AWAY [-] INFO.
PYou have now access to the user menu for operating the AMAX system.
Menu Navigation
This section provides an overview of how to navigate the programming menu of a text keypad.
Selecting a Menu
1. Select the menu and operate according to the menu prompt.
2. Press [▼] or [▲] to navigate to the desired menu.
3. Press [#] to enter a menu.
5
5.1
5.2
5.3
AMAX panel Programming and operating the AMAX panel | en 11
Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.05 | 06 | F.01U.309.297
All manuals and user guides at all-guides.com
all-guides.com

Exiting a Menu
4Press [–] to get back to the previous menu.
Confirming the Input
4Press [#] to confirm the input.
Switching between Settings
4Press and hold [*] for 3 seconds to switch between settings.
Operating a Menu
1. Operate according to the menu prompt.
Select the menu and enter data for specific programming items according to the display
on the keypad to complete the programming, step by step.
2. Press [#] to confirm each step.
Exiting the Programming Menu
1. Complete all programming input by repeating the programming steps above and press [–]
to get back to the current main menu level by level.
2. Press [–] to get to the EXIT PROG. +SAVE menu.
It is optional to save or not to save the programming data.
1. Select EXIT PROG. +SAVE and press [#] to save the data and to exit the programming
mode.
2. Select EXIT PROG. UNSAVED and press [#] to exit programming mode without saving
the data.
Programming the AMAX panel with a text keypad
Installer menu
The following graphics show an overview of the installer menu structure displayed on a text
keypad.
5.4
5.4.1
12 en | Programming and operating the AMAX panel AMAX panel
2016.05 | 06 | F.01U.309.297 Quick Installation Guide Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com

0
0
0
0
0
0
0
5
TCP/UDP TRANSMIT
0-tcp
1-udp
3-256 bits key
DC09 ENCRYPT. KEY
DC09 ENCRYPT. KEY
0-disable 1-enable
2-192 bits key
1-udp
DC09 ENCRYPT. OPT.
LOCAL TIME SYNC EN
0-disable 1-enable
2-192 bits key
NETW. POLLING: min
0-disable
1-128 bits key
0-tcp
000000
0
000000
000000
000000
RECEIVER SETTING
SUBSCRIBER ID No.
IP/PORT 17 DIGIT
05
0 - 9 B - E
Telephone No. </= 17 Digits IP = 12 Dig. + Port = 5 Dig.
TEL.No.(17 DIGIT)
1 COM+REPORT MANAG
ACK WAIT TIME: sec
IP/PORT 17 DIGIT
INPUT RECEIVER No.
FORMAT
1-Cid
TEL.No.(17 DIGIT)
SUBSCRIBER ID No.
3-conettix ip
NETWORK ANTIREPLAY
SUBSCRIBER ID No.
000001
DC09 ID No.2(3-16)
LPREF(6 DIGIT)
5
DC09 RRCVR ENABLE
0
3-256 bits key
LOCAL TIME SYNC EN
0-disable 1-enable
SET TIME ZONE
0=-12:00, 1=-11:00, 2=-10:00, 3=-9:00, 4=-8:00, 5=-7:00, 6=-
6:00, 7=-5:00, 8=-4:30, 9=-4:00, 10=-3:30, 11=-3:00, 12=-
2:00, 13=-1:00, 14=+0:00, 15=+1:00, 16=+2:00, 17=+3:00,
18=+3:30, 19=+4:00, 20=+4:30, 21=+5:00, 22=+5:30,
23=+5:45, 24=+6:00, 25=+6:30, 26=+7:00, 27=+8:00,
28=+8:30, 29=+9:00, 30=+9:30, 31=+10:00, 32=+11:00,
33=+12:00, 34=+13:00, 35=+14:00
15
Telephone No. </= 17 Digits IP = 12 Dig. + Port = 5 Dig.
1
0 - 9 B - E
000000
0-disable 1-enable
0 - 9 B - E
DC09 ID No.1(3-16)
IP/PORT 17 DIGIT
2-sia dc03
5-sia dc09(2xid)
DC09 RRCVR ENABLE
LPREF(6 DIGIT)
DC09 ENCRYPT. OPT.
0-disable
1-128 bits key
1
05 - 99 seconds
1
1
05 - 99 seconds
NETW. POLLING: min
PROTOCOL TYPE
1-Cid
DC09 ID No.1(3-16)
PROTOCOL TYPE
0-disable 1-enable
ACK WAIT TIME: sec
1-Cid
2-sia dc03
05 - 99 seconds
EN=1
ACK WAIT TIME: sec
RRCVR(6 DIGIT)
Default
Menu Items
Parameters / Description
Certification
4-sia dc09
2-sia dc03
1
000001
1
TCP/UDP TRANSMIT
0
SET TIME ZONE
0=-12:00, 1=-11:00, 2=-10:00, 3=-9:00, 4=-8:00, 5=-7:00, 6=-
6:00, 7=-5:00, 8=-4:30, 9=-4:00, 10=-3:30, 11=-3:00, 12=-
2:00, 13=-1:00, 14=+0:00, 15=+1:00, 16=+2:00, 17=+3:00,
18=+3:30, 19=+4:00, 20=+4:30, 21=+5:00, 22=+5:30,
23=+5:45, 24=+6:00, 25=+6:30, 26=+7:00, 27=+8:00,
28=+8:30, 29=+9:00, 30=+9:30, 31=+10:00, 32=+11:00,
33=+12:00, 34=+13:00, 35=+14:00
15
NETW. POLLING: min
RRCVR(6 DIGIT)
1
Figure 5.1: Communications and Reporting Manager
AMAX panel Programming and operating the AMAX panel | en 13
Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.05 | 06 | F.01U.309.297
All manuals and user guides at all-guides.com

3-all
7-rec 1,3 (2,4 b)
6
HTTP PORT NUMBER
ARP CA TIME(SEC)
WEB/USB PWD
REPORT EXP. TIME:m
0
2-siren
NET. ACC. P PWD
MODULE HOSTNAME
UNIT DESCRIP.
TCP/UDP PORT NUM
SIM PIN
NET. ACC. P NA
AES ENCRYPTION
AUTOM. TEST REPORT
1
0
MEDICAL AL. REPORT
AES KEY STRING
IPV4 DNS SERVER IP
NET. P USR NA
4-receiver 4
IPV6 DNS SERVER IP
ALT IPV4 DNS SERVR
ALT IPV6 DNS SERVR
CONFIG B450 ?
AES KEY SIZE
WEB/USB ACCESS
TCP KEEP AL.(SEC)
FIRMWARE UPGRADE
6
RPT DEL. ENTRY T:s
6
PANIC ALARM REPORT
FIRE ALARM REPORT
8-rec 1, 2
AC FAULT REP. REC.
ZONE RESTORE REP.
5-rec 1, 2, 3, 4
EN=1/5/6/7
1-receiver 1
9-rec 1 (2 b)
10-rec 3, 4
1-report
EN=1/5/6/7
6
SYSTEM STATUS REP.
SYS REP. WITH DOME
0
SSI,EN=30
0
0
AC FAULT REP. DOME
EN=1/5/6/7
MEDICAL 2BUTTON AL
32 or 48 or 64 hexadecimals characters
0-99 ASCII printable characters
0-disabled
EN=0
1-2 ip modules
000 = No time limit 001 - 255 = 1 - 255 minutes
6
30
FIRE 2BUTTON AL
1
1
PANIC 2BUTTON AL
1
00080
0-1 ip module
6-rec 1 (2,3,4 b)
11-rec 3 (4 b)
1,2
0.0.0.0 - 255.255.255.255
3-receiver 3
2-receiver 2
0-no report
AWAY ARM/DI REPORT
STAY ARM/DI REPORT
DUAL IP
IP COMMUNICATOR
0-disable 1-enable
0-disable 1-enable
IPV4 ADDRESS
6
0
EN=1/5/6/7
07700
0
255.255.255.0
B42V2
1
0
600
0
1
0
45
0-disable 1-enable
0
INPUT MODULE No.
IPV6 MODE
IPV4 DHCP
IPV4 SUBNET MASK
UPNP ENABLE
IPV4 DFLT GATEWAY
0-99 ASCII printable characters
4-8 numbers
4-10 ASCII printable characters in length
0-disable 1-enable
0
Up to sixty-three characters (letters, numbers, and dashes)
0
0000:0000:0000:0000:0000:0000:0000:0000 -
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
0-99 ASCII printable characters
0-disable 1-enable
Up to twenty ASCII printable characters
0
0000:0000:0000:0000:0000:0000:0000:0000 -
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
0-disable 1-enable
0
0.0.0.0 - 255.255.255.255
1
0.0.0.0 - 255.255.255.255
0.0.0.0 - 255.255.255.255
1-65535
0
0.0.0.0 - 255.255.255.255
1-600 (seconds)
1-65535
Menu Items
Parameters / Description
Certification
Default
REPORT SETTING
Only display for module 1, two options for this item:
"NO, RETURN", "YES, CONTINUE"
0-65 (seconds)
1-128 bits, 2-192 bits, 3-256 bits
TEST REPORT: min
00 - 59 minutes Others = Do not use real-time report
6-8 hours
7-12 hours
3-3 hours
TEST REPORT DURAT.
TEST RPT INTERV: h
0-disable
EN=1-8
8
1-1 hour
2-2 hours
TEST REPORT: hour
00 - 23 hours Others = Do not use real-time report
99
4-4 hours
5-6 hours
99
8-24 hour
Figure 5.2: Communications and Reporting Manager (continued)
14 en | Programming and operating the AMAX panel AMAX panel
2016.05 | 06 | F.01U.309.297 Quick Installation Guide Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com

Menu Items
Parameters / Description
Certification
Default
REM. ACCESS ARMED
14
REMOTE ACCESS
0-disable 1-enable
DOMESTIC CALL
15
0000000000
0-disable 1-enable
1
1
0
0 = Panel does not answer
1 - 13 = Number of rings until the control panel responds
14 = Call the control panel and allow the phone to ring no
more than twice and hang up. Wait a minimum of 8 sec and
call the control panel again. The control panel answers on
the first ring.
15 = Call the control panel and allow the phone to ring no
more than four times and then hang up. If you call again
within 45 sec, the control panel answers the call on the first
ring.
CALLBACK/DOMEST No
DOMESTIC No (1-4)
0-disable 1-enable
0
0-disable 1-enable
RPC IP/ PORT/ POLL
REMOTE PSTN ACCESS
RPC IP ADDRESS
CALLBACK/ DOMESTIC
RING TIMES
RPC ACCESS CODE
CALLBACK SETTING
RPC PORT 5 DIGIT!
CALLBACK PHONE No
RPC POLL: 1-15h
REMOTE IP ACCESS
CHANGE DOM PHO. No
Figure 5.3: Communications and Reporting Manager (continued)
60
03
0
1
Certification
Default
Menu Items
INSTALLER CODE
KEYFOB BUTTON3
2 CODE MANAGER
0-disable 1-enable
PAUSE T:100ms 1-15
1234
0-master 1 code
2-super code
KEYFOB ID: MANUAL
press* 3s for AUTO. 9 Digits
0-not used
4
1
0-disable 1-enable
CODE PERMISSIONS
KEYFOB ID: AUTO
0-disable 1-enable
2-stay arm
1
1
0-disable 1-enable
1
LEVEL 1 ACCESS
REC T.OUT:1-80sec
CODE INSIDE MACRO
2581
ARM/DISARM INSTAL.
CODE LENGTH
TAMPER RESET USER
DATE/TIME MASTER U
INPUT MACRO (1-3)
USER No.
4-arming code
press* 3s for MANUAL. Trigger device, RFID will be entered
CHANGE USER CODE
USER MACRO AUTH.
1-master 2 code
6-not used
3-basic code
5-duress code
Parameters / Description
1-output control
0-disable 1-enable
USER CODE IN AREA
USER CODE
USER CODE PRIORITY
0-disable 1-enable
2580
0
EN=0
FORCE CODE CHANGE
MACRO CONFIG
Figure 5.4: Code Manager
AMAX panel Programming and operating the AMAX panel | en 15
Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.05 | 06 | F.01U.309.297
All manuals and user guides at all-guides.com

01-instant
03-delay 1
SILENT AL./CHIME
1-keypad zone
2-input mod. zone
24-technical al.
26-instant report
23-external fault
17-key stay on/of
15-key away on/of
00-not used
04-interior del.1
00 = zone not used 01 - 16 = Area 1- 16
5-RF RFUN no magn
ZONE TYPE
ZONE FUNCTION No.
ZONE FUNCTION
19-24 hour fire
05-delay 1 exit
07-delay 2
09-delay 2 exit
10-inter. del 2 e
ZONE RFID: MANUAL
02-interior inst.
11-follower
12-inter. followe
14-key away toggl
FORCE ARM/BYPASS
08-inter. del 2
ZONE NAME INPUT
ZONE PULSE COUNT
0-on board zone
4-RF RFGB glassb.
INPUT ZONE No.
Menu Items
3
EN=0/2
06-inter. del 1 e
13-24 hour
1-silent alarm
25-reset
1-force arm
EN=0/2
18-24 hour panic
0
0-disabled
00 = disabled 01 - 09 Pulses
20-24 h fire veri
21-tamper
22-bolt contact
2-chime mode
1-1 time al. lock
0-disabled
2-bypass
3-all
0-disabled
3-all
16-key stay toggl
3-6 time al. lock
2-3 time al. lock
ADD/DELETE ZONES
ZONE FUNCTION
ZONE RFID: AUTO
ZONE IN AREA
ZONE MODULE SEL.
press* 3s for AUTO. 9 Digits
3-RF all
Parameters / Description
3 ZONE MANAGER
Default
Certification
6-not used
press* 3s for MANUAL. Trigger device, RFID will be entered
00
EN=0
0
0
ZONE LOCKOUT
4-alarm duration
EN=0
Figure 5.5: Zone Manager
16 en | Programming and operating the AMAX panel AMAX panel
2016.05 | 06 | F.01U.309.297 Quick Installation Guide Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com
all-guides.com

EN=1/5/6/7
6
60
1
EN=0
10-dest. 3,4
8-dest. 1,2
9-dest 1 /2 b
3-all
0-disable 1-enable
11-rec 3 (4 b)
10-rec 3, 4
0-disabled
5-dest. 1,2,3,4
0
1
0
ZONE ALARM ON KP
0-disable 1-enable
ZONE DOMESTIC CALL
11-dest 3 /4 b
PULSE COUNT DURAT.
TROUBLE DOM EN
UNVERF.REP/CROS.ZN
8-rec 1, 2
9-rec 1 (2 b)
ZONE EOL
ZONE STATUS REPORT
CROSS ZONE TIMER
60
0
2-destination 2
6-dest 1 /2,3,4 b
1-destination 1
7-dest 1,3 /2,4 b
DETECT. T. x100ms
3
000 = disabled 1 - 999 sec = Duration
3-destination 3
5-rec 1, 2, 3, 4
EN=0
2-cross zone
0-no report
3-nc
Parameters / Description
6-rec 1 (2,3,4 b)
2-receiver 2
4-no
2-reserve
0-no report
4-receiver 4
4-destination 4
1-deol 2,2k/2,2k
1-unverified alar
7-rec 1,3 (2,4 b)
0-eol 2,2k
1-receiver 1
Default
3-receiver 3
Menu Items
Certification
Figure 5.6: Zone Manager (continued)
AMAX panel Programming and operating the AMAX panel | en 17
Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.05 | 06 | F.01U.309.297
All manuals and user guides at all-guides.com

EN=45
EN=10?
1
Certification
Default
6-all area on ex
03-follow ar 2-4
entry time(stay)
3
01-follow area 2
Parameters / Description
05-follow ar 2-6
10
1
14-follow ar 2-15
00-none
45
yes
yes
yes
yes
0
07-follow ar 2-8
09-follow ar 2-10
30
30
KEYPAD LOCK COUNT
60
5-1st area flh ex
0-disable 1-enable
0-disable 1-enable
4-1st area on ex
Menu Items
4 KP/AREA MANAGER
EN=1?
0-15, only valid when "FOLLOW EN STANDARD" is disabled
3-both arm
KEYPAD AREA
ALARM INDIC ENABLE
1-stay arm
ENTRY DELAY 2: sec
EXIT DELAY: sec
0-disable
INPUT AREA No.
ENTRY/EXIT TIMING
ENTRY DELAY 1: sec
KEYPAD ALARM TONE
12-follow ar 2-13
13-follow ar 2-14
15-follow ar 2-16
KEYPAD INDICATION
COMMON AREA
06-follow ar 2-7
08-follow ar 2-9
KEYPAD IN AREA
BACKL. ON ENTRY T.
INPUT KEYPAD No.
02-follow ar 2-3
exit time(stay)
04-follow ar 2-5
11-follow ar 2-12
exit tim(sty) mst
1
2-1st area flash
3-all area on
0-disable
0
0-disable 1-enable
1-1st area on
KEYPAD LOCKOUT
FOLLOW EN STANDARD
MASTER KP RES: sec
00-99, 00=always
MASTER KP LED ON
MASTER KP AL TON
KP LED EXP.: sec
01-99 sec, 00=always on
ent time(awy) mst
2-away arm
exit tim(awy) mst
AUDIBLE: MUL SEL *
0-disable 1-enable
10-follow ar 2-11
01 - 16 00 = Master 99 = not used
2
0
exit time(away)
EN=0/1
yes
yes
entry time(away)
yes
ent time(sty) mst
yes
Figure 5.7: Keypad and Area Manager
18 en | Programming and operating the AMAX panel AMAX panel
2016.05 | 06 | F.01U.309.297 Quick Installation Guide Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com

CHANGE DATE / TIME
5 SYSTEM MANAGER
0-disabled
0-disable 1-enable
ENCL TAMP. TIMING
1 - 9999 x100ms
DEFAULT PANEL YES
DEOL TAMP. BYPASS
FAULT ANALYSIS
FW VERSION
0-disable 1-enable
KP 2 BUTTON ALARM
SIREN SUPERVISED
0-disable 1-enable
1
SYS TAMPER INDIC.
0-disable 1-enable
EN=1
1
0-disable 1-enable
1
Default
FAULT CONFIG
00 = disabled 01 - 15 minutes
0-disable
DATE / TIME FAULT
BATT. CHK INTERVAL
0-disable 1-enable
0-98 min 99=disable
DATE/TIME
FAULT SOUND REMIND
AC FAULT DELAY T.
EN=15
15
EN=1
0
EN=3
60
EN=?
1
QUICK ARM ONLY */#
0-disable 1-enable
2-DE 4-FR 5-PT 7NL
10
EN=3-10
0
0-disable 1-enable
3
COMPANY NAME
DEFAULT VOICE NO
2-po-2 enabled
3-po-1+2 enabled
SYS TAMP. ALL AR.
FACTORY DEFAULT
VOICE MEM. DEFAULT
AREA NAME
LANGUAGE VERSION
DEFAULT PANEL NO
SYSTEM VIEW
DEFAULT VOICE YES
1-po-1 enabled
0 = area1 1 = all areas
SYSTEM SETTING 1
EN=0
1-EN 6-PL 9-TR
Menu Items
Parameters / Description
Certification
INSTALLER ACCESS
PHO. LN SUPERVISED
DST OPTIONS
START DST
1-euro
2-brazil
3-mexico
4-us nor mexico
5-customize
permanent start/stop at 1 am
0
1=January,2=February,3=March,4=April,5=May,6=June,7=J
uly
1=Monday,2=Tuesday,3=Wednesday,4=Thursday,5=Friday
6=Saturday,7=Sunday
EN=0
WEEK DAY
MONTH
ORDINAL
WEEK DAY
STOP DST
1=1st,2=2nd,3=3rd,4=4th,5=last
1-EN 3-ES 4-FR 5PT
INPUT AREA No.
EN=0
MONTH
1=January,2=February,3=March,4=April,5=May,6=June,7=J
uly
ORDINAL
1=1st,2=2nd,3=3rd,4=4th,5=last
1=Monday,2=Tuesday,3=Wednesday,4=Thursday,5=Friday
6=Saturday,7=Sunday
1-EN 3-ES 6-PL 8SE
1
EVENT RECORD COUNT
SYSTEM SETTING 2
3 - 10 Record count of same event per armed period
FORCE ARM FAULT/TA
0
AREA NAME
0-disable 1-enable
1
PAD DEFAULT OPTION
Figure 5.8: System Manager
AMAX panel Programming and operating the AMAX panel | en 19
Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.05 | 06 | F.01U.309.297
All manuals and user guides at all-guides.com

OUTPUT TIME3: sec
SIREN SETTINGS
SIREN TIME: min
Master Timer for Outputs
Certification
Menu Items
0-continuous
INT SIREN INDIC ON
0-disable 1-enable
0-disable 1-enable
0-disable 1-enable
00
00 = all/any Area/s 01–16 Area 1-16
1-pulse
SIREN BEEP ENABLE
SIREN OFF ANY KEY
2-continuous inv
0
OUTPUT AREA/ZONE 3
OUTPUT MODE 3
Master Timer for Outputs
1
Default
0
1
1
000
Parameters / Description
0
OUTPUT SETTINGS
see OUTPUT EVENT TYPE1
ENTER OUTPUT No.
6 OUTPUT MANAGER
OUTPUT EVENT TYPE3
06-ext.stay siren
05-ext.away siren
5
01-syst. disarmed
02-system armed
03-sys al audible
04-sys alarm all
07-int. siren
08-int. sir w.tmp
09-entry/exit del
10-tel.line fault
11-mains fault
16-fire alarm
17-fire reset
12-battery fault
13-tamper
14-ext. fault
15-all faults
18-away armed
19-stay armed
20-reset
21-follow zn even
22-RF kf button 3
33-medical alarm
34-RF power fault
23-RF kf button 4
24-chime indic.
25-verified alarm
26-unverif. alarm
27-technic. alarm
28-bypassed zone
35-follow zone
36-schedule
OUTPUT AREA/ZONE 1
00 = all/any Area/s 01–16 Area 1-16
OUTPUT EVENT TYPE1
00-not used
29-ready to arm
30-walk test
31-24 hour alarm
32-panic alarm
OUTPUT MODE 1
0-continuous
1-pulse
2-continuous inv
OUTPUT TIME 1: sec
Master Timer for Outputs
OUTPUT EVENT TYPE2
see OUTPUT EVENT TYPE1
0
0-continuous
0
1-pulse
2-continuous inv
OUTPUT TIME 2: sec
Master Timer for Outputs
0
OUTPUT AREA/ZONE 2
00 = all/any Area/s 01–16 Area 1-16
0
OUTPUT MODE 2
Figure 5.9: Output Manager
20 en | Programming and operating the AMAX panel AMAX panel
2016.05 | 06 | F.01U.309.297 Quick Installation Guide Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com