JSI SWISH User manual

Installation Instructions
Modular Bench Top
Recommended Tools
Hardware Used
Step 1
Level Bench Height Storage Units
• Position storage units in desired location.
• Level all storage units front-to-back and
side-to-side by rotating adjustable glides.
• Storage units that share same bench top
are to be adjusted to same height.
jsifurniture.com
800.457.4511
812.482.3204 O
812.482.1548 F
225 Clay Street / PO Box 231
Jasper, Indiana 47546 Form No. INST-10010
Step 2
Position Bench Top onto Storage Units
• Place bench top face down on flat, smooth, soft floor,
as not to scratch/mar surface.
• Remove shelves and/or drawers from storage units.
• Carefully flip storage units upside down and place
onto bench top. Position units flush with back and
ends of bench top.
• #8x 1-1/4” Pan Head
Wood Screws
Page 1 of 2
#2 Phillips Head

Installation Instructions
jsifurniture.com
800.457.4511
812.482.3204 O
812.482.1548 F
225 Clay Street / PO Box 231
Jasper, Indiana 47546 Form No. INST-10010
Step 4
Attach Bench Ganging Brackets
• Secure bench storage units together using two
brackets and #8 x 5/8”pan head wood screws.
• Carefully flip unit to upright position and level.
Page 2 of 2
Modular Bench Top
(continued)
Step 3
Attach Bench Top to Storage Units
• Fasten units to top using factory predrilled holes,
#8 x 1-1/4”pan head wood screws.
Flush
to back
Flush
to end
Flush to end