Copyright © 2013 Somfy SAS. All rights reserved. 4
Video door phone - V400 RTS
EN
USE
Responding to a visitor
When a visitor presses the call button on the door station, the monitor rings twice and an image of the visitor is displayed.
Press the microphone activation button . The microphone activation indicator light comes on.
You can communicate with your visitor.
Note: You can communicate with your visitor for a maximum of 2 minutes.
If you press the microphone activation button again, the monitor screen goes off and communication is cut off.
Opening the gate
With the monitor screen switched on or off, press the button .
If the monitor screen is on, it will switch off when the gate opens.
Unlocking the electric door-opener/lock
With the monitor screen switched on or off, press the unlock button .
If the monitor screen is switched off, it switches off when the electric door-opener/lock is unlocked.
Image memory function
The monitor can store up to 400 photos.
Every time a visitor calls, a photo is taken automatically.
►Taking a photo of a visitor
During communication with a visitor, press the photo button to take a photo of the visitor.
►Displaying the stored photos
[1]. With the screen on or off, press the read button to display the most recently taken photos, then press the buttons to display the
6 next or previous photos.
[2]. Press the read button again to display a photo on the full screen, then press the keys to display the next or previous photo.
On each photo:
• the photo number is displayed in the top left-hand corner,
• the date and time at which the photo was taken is displayed at the bottom of the screen.
Note: After 10 seconds of no activity, the monitor screen switches off automatically.
►Clearing one photo or all photos
→Clearing a photo
Select the photo with the buttons then press the photo button .
→Clearing all the photos
To clear all the photos, the photo memory must be full (400 photos).
Briey press the photo button then press button for 3 seconds.
►Setting the date and time
[1]. Press the photo button until the screen comes on. The date ashes.
[2]. Each time the photo button is pressed, you access the following setting in the order: year - month - day - hour - minute.
Use the buttons to set the date and time.
[3]. Press the photo button to exit date and time setting mode. The monitor screen goes off.
