Amazone Tyrok 400 OL Quick guide

Translation of the original operating instructions
Trailed reversible plough
Tyrok 400 OL
Tyrok 400 OL V
SmartLearning
www.amazone.de

Please enter the identication data of the implement. The identication data can be found on
the rating plate.

TABLE OF CONTENTS
1 About this operating manual 1
1.1 Copyright 1
1.2 Diagrams 1
1.2.1 Warnings and signal words 1
1.2.2 Further instructions 2
1.2.3 Instructions 2
1.2.4 Lists 4
1.2.5 Item numbers in figures 4
1.2.6 Direction information 4
1.3 Other applicable documents 4
1.4 Digital operating manual 4
1.5 Your opinion is important 4
2 Safety and responsibility 5
2.1 Basic safety instructions 5
2.1.1 Meaning of the operating manual 5
2.1.2 Safe operating organisation 5
2.1.3 Recognising and preventing dangers 10
2.1.4 Safe operation and handling of the
machine 11
2.1.5 Safe maintenance and modification 13
3Intended use 17
4 Product description 18
4.1 Implement overview 18
4.2 Function of the implement 19
4.3 Special equipment 20
4.4 Protective equipment 21
4.5 Lighting and identification for
road travel 21
4.5.1 Rear lighting and identification 21
4.5.2 Front identification 21
4.5.3 Lateral identification 22
4.6 Warning symbols 22
4.6.1 Positions of the warning symbols 22
4.6.2 Layout of the warning symbols 23
4.6.3 Description of the warning symbols 24
4.7 Rating plates and the CE mark 28
4.7.1 Rating plate on the implement 28
4.7.2 Additional rating plate 29
4.8 Implement positions 29
4.9 Plough body 30
4.10 Shear bolt overload safety 31
4.11 Hydraulic overload safety 31
4.12 Headstock 32
4.13 Turning arms 32
4.14 Running gear 33
4.15 Disc coulter 33
4.16 Landside coulter 34
4.17 Landside protector 34
4.18 Skimmer 34
4.19 Trashboards 35
4.20 Hydraulic operating unit 35
4.21 Packer arm 36
4.22 Threaded cartridge 37
5Technical data 38
5.1 Dimensions 38
5.2 Running gear 38
5.3 Permitted mounting categories 38
5.4 Optimal working speed 38
5.5 Performance characteristics of
the tractor 38
5.6 Noise development data 39
5.7 Drivable slope inclination 39
6Preparing the machine 40
6.1 Preparing for initial operation 40
6.1.1 Calculating the required tractor
characteristics 40
6.1.2 Preparing the tractor 43
TABLE OF CONTENTS
MG7696-EN-II | A.1 | 28.07.2023 | © AMAZONE I

6.1.3 Removing the protective varnish 43
6.1.4 Preparing the central overload safety 44
6.1.5 Configuring the operating hours
counter 45
6.2 Coupling the implement 46
6.2.1 Removing the safety device against
unauthorised use 46
6.2.2 Preparing the headstock 46
6.2.3 Coupling the lower link 47
6.2.4 Coupling the top link 47
6.2.5 Coupling the hydraulic hose lines 48
6.2.6 Coupling the power supply 50
6.2.7 Moving the parking supports into
parking position 51
6.2.8 Lifting the parking support 52
6.2.9 Swivelling the plough body into
transport position 53
6.2.10 Installing the rear lighting 54
6.3 Preparing the implement for
operation 54
6.3.1 Manual adjustment of the working
width of the plough bodies 54
6.3.2 Manual adjustment of the plough
body working depth 56
6.3.3 Preparing the disc coulter for
operation 57
6.3.4 Preparing the skimmers for operation 59
6.3.5 Setting the tripping force for the
central overload safety 60
6.3.6 Adjusting the tripping force of the
decentralised overload safety 62
6.3.7 Adjusting traction assistance 63
6.3.8 Adjusting the packer arm with
packer catch hooks 65
6.4 Preparing the machine for road
travel 66
6.4.1 Checking the pre-tension of the
overload safety 66
6.4.2 Moving the packer arm into
transport position 66
6.4.3 Swivelling the plough body into
transport position 67
6.4.4 Installing the rear lighting 68
6.4.5 Move front identification into
transport position 68
7Using the implement 69
7.1 Removing the rear lighting 69
7.2 Bring front identification into
parking position 69
7.3 Preparing the implement for on-
land ploughing 70
7.4 Preparing the implement for
furrow ploughing 70
7.5 Moving the plough bodies into
working position 71
7.6 Bring packer arm into working
position 71
7.7 Hydraulic adjustment of the
plough body working width 72
7.8 Adjusting the furrow distance for
on-land ploughing 72
7.9 Adjusting the front furrow width
for furrow ploughing 73
7.10 Hydraulic adjustment of the
plough body working depth 73
7.11 Adjusting the front support
wheels to the working depth 75
7.12 Adjusting the tilt angle of the
plough relative to the tractor 76
7.13 Using the implement 77
7.14 Turning on the headlands 77
8Eliminating faults 79
9Parking the implement 82
9.1 Parking the implement in working
position with the parking support 82
9.1.1 Removing the rear lighting 82
9.1.2 Bring front identification into
parking position 82
9.1.3 Lowering the parking support 83
9.1.4 Parking the implement on the
plough bodies 83
9.2 Parking the implement in
transport position with parking
supports 84
TABLE OF CONTENTS
MG7696-EN-II | A.1 | 28.07.2023 | © AMAZONE
II

9.3 Uncoupling the implement 86
9.4 Uncoupling the power supply 87
9.5 Disconnecting the hydraulic
hose lines 87
9.6 Putting on the safety device
against unauthorised use 88
10 Repairing the machine 89
10.1 Maintaining the machine 89
10.1.1 Maintenance schedule 89
10.1.2 Checking the hydraulic hose lines 90
10.1.3 Checking the condition of wear parts 91
10.1.4 Checking the bolted connections 92
10.1.5 Checking the wheels 93
10.1.6 Checking the hub bearing 93
10.1.7 Changing the tyres 94
10.1.8 Checking the lower link pins and
top link pins 94
10.2 Cleaning the implement 95
10.3 Lubricating the implement 96
10.3.1 Overview of lubrication points 97
10.4 Storing the implement 100
11 Loading the machine 101
11.1 Lashing the implement 101
12 Disposing of the implement 102
13 Appendix 103
13.1 Bolt tightening torques 103
13.2 Other applicable documents 104
14 Directories 105
14.1 Glossary 105
14.2 Index 106
TABLE OF CONTENTS
MG7696-EN-II | A.1 | 28.07.2023 | © AMAZONE III