Civco ACCUCARE User manual

ACCUCARE™ REPLACEMENT KIT
VERTICAL ADJUSTMENT KNOB
REFERENCE GUIDE
FOR USE WITH:
CLASSIC STEPPER
EX3™ STEPPER
MULTI-PURPOSE WORKSTATION™ STEPPER

AccuCARE™ Replacement Kit English
REPLACEMENT KIT - VERTICAL ADJUSTMENT KNOB
NOTE: Replacement parts are only for use with CIVCO Classic Stepper, EX3™ Stepper, and
Multi-Purpose Workstation™ Stepper. Please see your equipment user guide for
additional warnings and full instructions for use.
STEPPER - INVERTED VIEW
Vertical Adjustment Knob
Crossbar
Set Screw
ITEMS COVERED BY THIS INSTRUCTION
Part Number Description
7511 Vertical Adjustment Knob
90524 #8-32 x 1/4" Socket Head Set Screw
TOOLS REQUIRED (NOT INCLUDED)
n5/16-inch hex wrench
nLoctite®Blue 242™ adhesive
1

English AccuCARE™ Replacement Kit
2
REPLACING VERTICAL ADJUSTMENT KNOB
1. Invert stepper so vertical adjustment knob is facing upward and set screw within stepper
crossbar is visible.
2. Using 5/16-inch hex wrench, remove set screw from crossbar.
3. Remove existing vertical adjustment knob by turning counter-clockwise until knob releases
from stepper.
NOTE: Knob should freely turn once set screw is removed. If unable to remove either knob
or screw, contact CIVCO.

AccuCARE™ Replacement Kit English
4. Insert new knob into place and turn until secure.
5. Apply Loctite Blue 242 adhesive to threads of set screw. Align set screw with groove and insert
into crossbar. Tighten until snug, then loosen just enough to allow free rotation of vertical
adjustment knob.
NOTE: Do not overtighten set screw.
6. Verify vertical adjustment knob is set in vertical position.
7. Allow time for adhesive on set screw to dry, following manufacturer's instructions for
application and dry time.
8. Inspect equipment for proper operation. Refer to equipment user guide for warnings and
instructions for use.
3

Notes
4

CORPO RATE HEADQUARTERS:
2301 Jones Blvd., Coralville, IA 52241
319.248.6757, 800.445.6741
Fax: [phone]
USA OFFI C E:
102 First Street South, Kalona, IA 52247-9589
319.248.6757, 800.445.6741
Fax: [phone]
COPYRIGHT © 2017ALL RIGHTS RESERVED. CIVCO IS A REGISTERED TRADEMARK OF CIVCO MEDICALSOLUTIONS. ACCUCARE, EX3, AND MULTI-PURPOSE
WORKSTATION ARE TRADEMARKSOF CIVCO MEDICALSOLUTIONS. ALLOTHER TRADEMARKS ARE PROPERTY OF THEIR RESPECTIVE OWNERS. PRINTED IN USA. ALL
PRODUCTS MAY NOT BE LICENSED IN ACCORDANCE WITH CANADIAN LAW.
WWW.CIVCO.COM
043-854A
MPS GmbH
Borngasse 20
35619 Braunfels, Germany
Fax: [phone]
DEUTSCHER SICHERHEITSVERTRETER
(Produktversagen, Körperverletzung oder Todesfall)