HunterDouglas 5-257 User manual

1
2
click
Place the screw driver under the end cap, turn
the screw driver and slide the end cap from the
bracket.
Slide the end caps onto the brackets.
Press the bottom of the front pro¿le upwards 
and turn it outwards .
Move the blind downwards out of the bracket. Pull
the aliJner out of the bearinJ.
8nfasten the lockinJrinJ. Slide a screw driver
between lockinJrinJand bracket and push the
bearinJin the aliJner direction.
Type 5-257
5-267
5-277
5-287
5-297
5-317

Push the front pro¿le to snap it into the bracket.
Installation Instruction
Roller Blind (Cassette System)
Coupled Blinds
Removal of the Roller Blind

2
1
click
21
3
X
3 mm
Install the second system without blind and front
pro¿le. 7here must be a Jap of 3 mm for the end
cap.
Install the main shade. )i[the mountinJbracket for
the coupled blind. X = 70 mm
Slide the aliJner throuJh the bracket into the bear-
inJ.
Press the bearinJand lift the blind until it snaps into
the bracket.
Place the tube adapter on the aliJner head. )i[the blind by turninJthe lockinJrinJaJainst the
bearinJ.
Place the front pro¿le in the bracket. Pay attention
that the front pro¿le slides under the nose of the
bracket.
7o aliJn the bottom rails, push the blind aJainst the
bearinJ, turn the blind, level the bottom rail with
the other one . 5elease to ¿[ the position 3.
1ot possible when usinJconnector set.
7o adMust skewinJ, put the provided $llen key into
the screw of the leveller and turn it left or riJht to
move the blind up and down. Support liftinJof larJe
heavy blinds with the palm of your hand.
Installation
Option: Leveller